ductile iron gate valve

DN50-DN600 Ductile Iron Soft Seated Gate Valve, Non Rising Stem, BS5163, FBE Coated

1. Provide your technical requirements and drawings
2. Get primary reply from us within 12 hours
3. Get technical solution and quotation from us within 24 hours
4. Technical solution and quotation confirmation
5. Provide samples if necessary
6. Contract review and signing
7. Arrange production and shipment
8. After sales service

Production Process:

1. Sandblasitng - To clean to castign to have a better adhesion while coating 

2. Coating - By electrical spray gun or fluidize bed - WRAS, NSF approved

3. Assembling - By qualified workers

4. Testing - 100% tested with sell and seat test

5. Packing - Plywood crates.

Features:

1. Fully complied with BS5163, EN1074-1 and EN1074-2.

2. No deformation when 5 times of over torque operation.

3. Overcome vaccum when water stops. No sucking dirt or sand from outside of the valve.

4. Low Torque with advanced design.

5. Online repair by 5 pcs of o-rings for stem seal.

6. AWWA flange is avaliable.

Model Code:

GBHX :

G: Gate valve

B: British Standard, A: AWWA Standard, 4: DIN standard, S: Australia Standard

H: Handwheel operated, C: Cap, B: Bare Head

X: Presreved

Valve Sizes:

Material :