Welding Type Stainless Butterfly Valve For Dairy Food / Fruit Juice Filed
-
Vurgulamak
hygienic butterfly valves
-
MalzemeDövme SS304 ve 316L Paslanmaz Çelik
-
Çap1/2" - 6"; DN15-DN150
-
Yapılandırma TasarımıÜç Sökülebilir Valf Kapağı
-
Bağlantı BiterAlın Kaynağı, Weldind, Üç kenetlenmiş, dişli
-
Sızdırmazlık moduTop Çekirdeği Tamamen Kapsüllenmiş
-
Manuel kol4 Dişli Çekme Kolu veya 12 Dişli Tutucu Kolu
-
Menşe yeriÇin
-
Marka adıOEM
-
SertifikaCE ISO,FDA
-
Model numarasıCX-S3PBV-04
-
Belge
-
Min sipariş miktarı1
-
Fiyatnegotiable
-
Ambalaj bilgileriKontrplak Kılıfları
-
Teslim süresi15-60 gün
-
Ödeme koşullarıL/C, T/T
-
Yetenek teminisipariş bazında
Welding Type Stainless Butterfly Valve For Dairy Food / Fruit Juice Filed
Sanitary Stainless Steel 3PCS Butterfly Valve welding type with Plastic Gripper Handle
Butterfly valves can be actuated either manually or pneumatically. There is a wide range of manual controls to meet the different system requirements. Pneumatic controls can be horizontal and vertical, single-, double-effect, and modulating. They can be fitted with control tops and proximity It is widely applied to many fileds,such as beer,beverage,dairy food,fruit juice,pharmacy,biological etc.
1. Various standards can be provided: DIN, 3A, SMS, ISO / IDF, BS / RJT, and ASME / BPE.
2. Available in sizes from DN25 / 1" to DN300 / 12"
3. Multiposition handles can be used for valves up to DN100 / 4";
4. Pull handles can be used for valves from DN25 / 1" to DN300 / 12"
Manual handle,
5. pneumatic actuator and electric actuator are interchangeable.
6. Seals comply with FDA 21CFR 177. 2600.
7. The valve body can be customized with a wide selection of different connections.
Design Features
1. Various standards can be provided: DIN, 3A, SMS, ISO / IDF, BS / RJT, and ASME / BPE.
2. Available in sizes from DN25 / 1" to DN300 / 12"
3. Multiposition handles can be used for valves up to DN100 / 4";
4. Pull handles can be used for valves from DN25 / 1" to DN300 / 12"
Manual handle,
5. pneumatic actuator and electric actuator are interchangeable.
6. Seals comply with FDA 21CFR 177. 2600.
7. The valve body can be customized with a wide selection of different connections.
Technical Parameters
|
Standard
|
3A,SMS,DIN,ISO,RJT,IDF
|
|
|
Product wetted steel parts
|
AISI304/AISI316L
|
Provided with material inspection report
|
|
Other steel parts
|
AISI304
|
|
|
Size
|
3/4"~6",DN20~DN150,19mm~152.4mm
|
|
|
Seal material
|
EPDM/VMQ/FPM
|
All seals material comply with FDA21CFR117.2600
|
|
Working pressure
|
≤10bar(145psi)
|
|
|
Supply pressure for air actuator
|
5~8(0~116psi)
|
|
|
Working temperature
|
EPDM:-14~248ºF(-10~120ºC)
|
|
|
VMQ:-58~356ºF(-50~180ºC)
|
||
|
FPM:22~446ºF(-30~230ºC)
|
||
|
Other materials are avaible upon request
|
||
|
Sterilization temperature
|
302ºF(150ºC,max 20min)
|
|
|
Outside surface treatment
|
Ra16~32uin(o.4~0.8um)
|
|
|
Inside surface treatment
|
Ra32~64uin(o.8~1.6um)
|
|
|
Connetion ends
|
butt-weld,clamped ends,male ends, flange ends
|
|
|
Pneumatic head
|
Normally closed(NC)-Air to open,spring to close
|
|
|
Normally open(NO)-Air to close,spring to open
|
||
|
Air to air(AA)-Air to open,air to close
|
||
Options
1. The seat and gasket can be NBR (Nitrile), VMQ (Silicone) or Viton (FPM) all complying with FDA 21CFR177.2600.
2. End connection can be butt-welded, sanitary clamp, threaded, flanged, I-line or others upon request.
3. Handle: 3-position pull handle; multi-position handle in either pure stainless steel or with plastic cover.
4. Actuator: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), electric actuator.
5. Control: position sensor, C-top controller, C-top controller (AS-I)
Products Show:
Puanlar ve İncelemeler
İlgili Vakalar
Hizmetlerimiz tüm endüstrileri kapsar ve dünyanın her yerine ulaşır.
Genel Değerlendirme
Derecelendirme Anlık Görüntüsü
Aşağıdaki tüm oyların dağılımıdırTüm İncelemeler